Metal Grill

GOAL OF PROJECT:

Heat up your next outdoor gathering with this Krylon® High Heat Max Fire Pit project.

SKILL LEVEL:

Beginner

PROJECT TIME:

1 Hour

SUPPLIES

STEPS

Home
Projects
Metal
Metal Grill

Krylon Supplies You'll Need

Krylon® High Heat Max

Aluminum

All paint should be used according to the manufacturer’s instructions.

WHERE TO BUY

Other Supplies You'll Need

All purpose cleaner/degreaser
Sandpaper or wire brush
Rag
Drop Cloth
Painters tape
All-purpose cleaner

Step 1

Set up a spray area by covering work area with a drop cloth. Make sure it is a well-ventilated area.

Step 2

Prep surface by sanding any rough areas. If there are areas with flaking rust, using a wire brush to remove it.

Step 3

Thoroughly clean the grill and lid with an all purpose cleaner/degreaser, making sure that there are no remnant of grease or drippings from food on the surface. Rinse with water and allow to dry.

Step 4

Tape off handles, grilling grate, and any other surfaces that you do not want to paint.

Step 5

Remove the lid from the grill, painting the items separately.

Step 6

Holding the can of Krylon® High Heat Max Aluminum 6-8 inches from the surface, begin painting using a sweeping side-to-side motion with slight overlap.

Step 7

Allow paint to dry for 30-60 seconds.

Step 8

Continue to apply light, multiple coats, waiting 30-60 seconds between each, until you are satisfied with the appearance.

Step 9

NOTE: Do not apply paint to the inside of the grill lid, to the inside base if it is a charcoal grill, or onto the grill grate on which food is placed.

Step 10

Krylon® High Heat Max dries to the touch in 10 minutes and to handle in about an hour.

Step 11

Allow to dry overnight before using.

METAL INSPIRATION

Get Inspired To Spray

Metal makeovers can be easy. Check out these great projects shared by spray paint fans just like you.

FIND YOUR INSPIRATION

Search